Epoxy Resin Material Coloured Modelling Paste For Sheet Metal Forming Mould
Product Details
| Materials: | Epoxy Resin | Color: | Brown |
|---|---|---|---|
| Package: | 10kg 15kg 20kg | Density: | 0.7-0.8 |
| Hardness: | 60-70 | Mixing Ratio: | 1 More Than 1 |
| Highlight |
coloured modelling paste,epoxy paste |
||
Product Description
Brown Modeling Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kg
Product introduction
This product is a two-component epoxy resin imported raw materials, after mixing, apply on the surface of model, after curing on nc machining can be processed into the required model, according to different design requirements for glue, curing content has excellent machining performance, milling, planing, cutting, drilling, and other processing, without a bit wear in the processing, processing and good surface finish and curing is exquisite, knife won't crack, easy to burnish, easy to repair, easy modification, size stability, non-toxic environmental protection, high dimensional accuracy, and reduce the mould cost, etc.
Product operation process
Given according to the proportion of fully mixing thoroughly, the same color. Try to avoid to produce bubbles, it is best to use vacuum mixer mixing. Strict control, with a thick layer of a coating is not more than 40 mm;If upset, after waiting for curing the second floor. The after curing processing, performance is better. (after curing: 80 ℃ + 8 h or 3 days) at room temperature, curing can be after rough machining, precision work after 3 days;The material of metal, composite structure materials such as sticky relay is extremely strong, mold release agents shall be used for rolling over. Make sure the strength of the support frame, stability and cleanness, machine
Introduction
| Material | 5200A | 5200B | Mixed |
| Description | epoxy resin | curing agent | |
| mixing ration | 1 | 1 | |
| Color: | Brown | Yellow | Brown |
| mixed time:500g,25°(min) | 30 | ||
| curing time before machining(20-25mm) (hours) | 6-8 | ||
| layer thickness (mm) | max.40 | ||
| Density:(g/cm³): | 0.7-0.8 | ||
| Hardness(Shore D): | 65-70 | ||
| Temperature Resistance(°C): | 70-75 | ||
| Coefficient of Thermal Expansion(10-6 K-1): | 45-50 | ||
| Compressive Strength(N/mm²): | 52 | ||
| Flexural Strength(N/mm²): | 32 | ||
| Tensile Strength(N/mm²): | 26 | ||
| Package(kg) | 10 | 10 |
Characteristics:
easily shaped and machined,fine surface structure
Applications:
yacht model,benchmark model, system and sand-cast model, rapid prototype,etc.
Product Highlights
Brown Modeling Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kg Product introduction This product is a two-component epoxy resin imported raw materials, after mixing, apply on the surface of model, after curing on nc machining can be processed into the required model, according to ...
35mm #651 Polyurethane Tooling Blocks For High Pressure Molding
35mm #651 Polyurethane Tooling Blocks For High Pressure Molding Quick Details Place of Origin: Guangzhou, China, (mainland) Brand Name: Lihong Model Number: Epoxy tooling wood Material: resin tooling board Thickness: 30mm-150mm, 30mm-150mm Size: 1500*500mm,700*450mm, 1500*500mm,700*450mm,690mm*440mm ...
Smooth Non Porous Composite Polyurethane Foam Board
Modeling CompositeTooling Board For Car Industry Application - Moldling - Car Checking Fixture Composite Polyurethane Foam Board Modeling CNC Processing Smooth Surface Introduction Modeling boards are useful in numerous applications including patterns, master models, and presentation models.,foundry ...
Composite Polyurethane Foam Board Modeling CNC Processing Smooth Surface
Modeling CompositeTooling Board For Car Industry Application - Moldling - Car Checking Fixture Introduction Modeling boards are useful in numerous applications including patterns, master models, and presentation models.,foundry patterns, metal forming applications, jigs, and checking fixtures, yacht ...
Casting Pattern Mould Less Dust Polyurethane Epoxy Tooling Board
Casting Pattern Mould Less Dust Polyurethane Epoxy Tooling Board Low CTE Improved dimensional stability at high temperatures. Other boards, such as polyurethane boards, often cannot withstand high temperatures (more than +120°C) and may deform. Tools made from black polyurethane board ® sheets ...
Please use our online inquiry contact form below if you have any questions, our team will get back to you as soon as possible.
