Send Message
Home ProductsTooling Paste

Epoxy Resin Tooling Paste , Coloured Modelling Paste For Foaming Mould

Epoxy Resin Tooling Paste , Coloured Modelling Paste For Foaming Mould

  • Epoxy Resin Tooling Paste , Coloured Modelling Paste For Foaming Mould
Epoxy Resin Tooling Paste , Coloured Modelling Paste For Foaming Mould
Product Details:
Place of Origin: China
Brand Name: LH-tool®
Certification: ISO9001:2008 Standard
Model Number: LH5200 AB
Payment & Shipping Terms:
Minimum Order Quantity: 200kgs
Price: Negotiation
Packaging Details: Standard Carton Packing
Delivery Time: 15 Days
Payment Terms: T/T
Supply Ability: 30 Tons per Month
Contact Now
Detailed Product Description
Materials: Epoxy Resin Color: Brown
Package: 10kg 15kg 20kg Density: 0.7-0.8
Hardness: 60-70 Mixing Ratio: 1 More Than 1
High Light:

molding paste


epoxy paste

Master Models Tooling Paste Epoxy Resin Materials Packing 10kg 15kg 20kgs



easily shaped and machined,fine surface structure



yacht model,benchmark model, system and sand-cast model, rapid prototype,etc.



Product introduction

This product is a two-component epoxy resin imported raw materials, after mixing, apply on the surface of model, after curing on nc machining can be processed into the required model, according to different design requirements for glue, curing content has excellent machining performance, milling, planing, cutting, drilling, and other processing, without a bit wear in the processing, processing and good surface finish and curing is exquisite, knife won't crack, easy to burnish, easy to repair, easy modification, size stability, non-toxic environmental protection, high dimensional accuracy, and reduce the mould cost, etc.


Product application


1.Wind-power blades can be applied to the model of the male die, the cabin cover mould, automobile master model of casting mould board, checking fixture production, foundry industry, sand core boxes, and various modeling tools etc.

2. used for sheet metal forming mould, tensile modulus, rolling zhong mold, mold, and the bending modulus.

3. used for foaming mould, vacuum forming mould, injection mould, composite materials forming mould, etc

4. quick samples/hand: for small batch production of plastic material.


Product main properties


This product is a two-component materials, by automatically output device fast coating model, single coating thickness can be up to 40 mm, reaction put the quantity of heat low, coating and processing when no smell, room temperature curing can be carried out after a day of machining, machining performance is good, good surface effect, material size stability is good


Product operation process

Given according to the proportion of fully mixing thoroughly, the same color. Try to avoid to produce bubbles, it is best to use vacuum mixer mixing. Strict control, with a thick layer of a coating is not more than 40 mm;If upset, after waiting for curing the second floor. The after curing processing, performance is better. (after curing: 80 ℃ + 8 h or 3 days) at room temperature, curing can be after rough machining, precision work after 3 days;The material of metal, composite structure materials such as sticky relay is extremely strong, mold release agents shall be used for rolling over. Make sure the strength of the support frame, stability and cleanness, machine



Material 5200A 5200B Mixed
Description epoxy resin curing agent  
mixing ration 1 1  
Color: Brown Yellow Brown
mixed time:500g,25°(min)     30
curing time before machining(20-25mm) (hours)     6-8
layer thickness (mm)     max.40
Density:(g/cm³):     0.7-0.8
Hardness(Shore D):     65-70
Temperature Resistance(°C):     70-75
Coefficient of Thermal Expansion(10-6 K-1):     45-50
Compressive Strength(N/mm²):     52
Flexural Strength(N/mm²):     32
Tensile Strength(N/mm²):     26
Package(kg) 10 10  












Contact Details
Yongzhou Lihong New Material Co.,Ltd

Contact Person: 谭琳

Tel: +8613533033735

Send your inquiry directly to us
Other Products